`GLIBCXX_3.4.14' not found

Technical support for the Linux and Mac platforms for all Trine games.
dubigrasu
Posts: 8
Joined: Wed Apr 20, 2011 12:56 pm

Re: `GLIBCXX_3.4.14' not found

Postby dubigrasu » Sat Apr 23, 2011 8:06 am

Interesting.
I'm having the same error at install time. However, after extracting the installer (seems to be a zip file?) the game runs without problems.
I've also copied inside the updated files from the small unofficial update above and everything seems OK.

So in short, extract the installer in a folder (say Trine) and run from within "trine-launcher".

tomu
Posts: 2
Joined: Thu Apr 21, 2011 12:54 pm

Re: `GLIBCXX_3.4.14' not found

Postby tomu » Sat Apr 23, 2011 9:10 am

Hi, Can someone tell me what I'm doing wrong.

I got 10.4 LTE.

I download oficial 32bit ver of Trine. then unoficial update then I extract files to the Trine folder and when I try to start Installer I get again:

Code: Select all

[email protected]:~/Pobrane/GRY/Trine Install$ '/home/tomasz/Pobrane/GRY/Trine Install/Trine-1.32.run'
/home/tomasz/Pobrane/GRY/Trine Install/Trine-1.32.run: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.14' not found (required by /home/tomasz/Pobrane/GRY/Trine Install/Trine-1.32.run)



Help I saw game on WIN is great I wish to have in on my UBU.

dubigrasu
Posts: 8
Joined: Wed Apr 20, 2011 12:56 pm

Re: `GLIBCXX_3.4.14' not found

Postby dubigrasu » Sat Apr 23, 2011 11:46 am

I'm also a bit puzzled about this unofficial update change-log.
Short changelog:
Installer issue has been fixed.


I see in the archive only two updated executable for running the game and some shaders.
What installer?
Isn't this update suppose to be applied to an already installed game?

What I'm getting wrong?

deaddrop
Posts: 4
Joined: Wed Apr 20, 2011 1:46 pm

Re: `GLIBCXX_3.4.14' not found

Postby deaddrop » Sat Apr 23, 2011 2:01 pm

Yeah, that download looks like an update to an already successful installation, I'm just gonna wait for an updated file on the download site, any word on that?

Also, as a side note, I'm having trouble accessing these boards sometimes, you guys must be on fire!

Thanks

Terseus
Posts: 1
Joined: Sat Apr 23, 2011 2:27 pm

Re: `GLIBCXX_3.4.14' not found

Postby Terseus » Sat Apr 23, 2011 2:52 pm

Ok I'd managed to install the game in Linux without updating the libstdc++ system library, here you have instructions to do it:
  1. First download the library from Debian testing repository:
    libstdc++ for 32bits
    libstdc++ for 64bits
  2. Extract it (like a zip archive), it'll create control.tar.gz and data.tar.gz, extract data.tar.gz, which will create this structure:
    • usr
    • |- lib
    • ---|- libstdc++.so.6.0.15
    • ---|- libstdc++.so.6
    Copy the files inside "lib" in the directory where you have the Trine installer.
  3. Open a terminal, cd to the directory where you have the Trine installer and type

    Code: Select all

    export LD_LIBRARY_PATH="`pwd`:$LD_LIBRARY_PATH"
    chmod +x Trine-installer.run
    ./Trine-installer.run

    Change "Trine-installer.run" to your installer's name of course.
  4. Now the installer will use the recently downloaded library instead of the system's library, and will work ^_^

Sorry for my bad english, if it's not clear reply here and I will try to explain it better.
Hope this helps.

PD.: BTW thanks to Frozenbyte to care about Linux players :)

Reyhn
Posts: 1
Joined: Sat Apr 23, 2011 3:40 pm

Re: `GLIBCXX_3.4.14' not found

Postby Reyhn » Sat Apr 23, 2011 3:41 pm

This worked for me, thanks ! :)

phaedrus
Posts: 1
Joined: Sun Apr 24, 2011 6:13 am

Re: `GLIBCXX_3.4.14' not found

Postby phaedrus » Sun Apr 24, 2011 6:31 am

Terseus wrote:Ok I'd managed to install the game in Linux without updating the libstdc++ system library, here you have instructions to do it:

(...snip instructions...)

Sorry for my bad english, if it's not clear reply here and I will try to explain it better.
Hope this helps.


Thanks for the reminder Terseus. Your English was fine (then again, I've used this workaround before ;). I'm running Slackware64 13.0, and only slackware-current has the right C++ libs. However, I ran into a second problem, libstdc++ was missing a couple symbols. So, I ended up doing this:

First, grab cxxlibs-6.0.14-x86_64-1.txz and glibc-solibs-2.13-x86_64-4.txz from your favorite slackware-current mirror. Put them in the directory to your Trine installer, and untar them there:

Code: Select all

$ tar -xJf cxxlibs-6.0.14-x86_64-1.txz
$ tar -xJf glibc-solibs-2.13-x86_64-4.txz


This will give you a usr/, lib64/, etc/, sbin/ and install/ directory in your current directory. Run the Trine installer like this (again, from the directory the Trine installer is in):

Code: Select all

$ LD_LIBRARY_PATH="$(pwd)/lib64:$(pwd)/usr/lib64:$LD_LIBRARY_PATH" ./lib64/ld-2.13.so $(pwd)/Trine-Installer.run


This does effectively the same thing as Terseus' commands, but runs the Trine installer with a completely new libc.

Basically, try Terseus' method. If you get an 'undefined symbol' or 'symbol lookup error', grab the full glibc package that matches the libstdc++ package and try my technique. I found my packages at: http://slackware.cs.utah.edu/pub/slackw ... kware64/a/. If you don't want to figure out how to find and unpack similar packages for your system, these should actually work just fine (even if you are on, say, fedora 12). YMMV. If you fry your computer, you were typing in commands written by Some Dude On The Internet™.

capponz
Posts: 7
Joined: Sat Apr 23, 2011 3:10 am

Re: `GLIBCXX_3.4.14' not found

Postby capponz » Sun Apr 24, 2011 7:09 am

Well, the installation works now. But there are rendering errors.
...again... Why you release a non working version???

dubigrasu
Posts: 8
Joined: Wed Apr 20, 2011 12:56 pm

Re: `GLIBCXX_3.4.14' not found

Postby dubigrasu » Sun Apr 24, 2011 10:56 am

If you want to get help you need to provide some more details than this. The graphic card type, the drivers you use....etc.
I don't think that the guys can help you with something as vague as "rendering errors".

And frankly, the game is working perfectly.

blah
Posts: 2
Joined: Sun Apr 24, 2011 9:17 pm

Re: `GLIBCXX_3.4.14' not found

Postby blah » Sun Apr 24, 2011 9:31 pm

I also have the rendering initialization problem after using the installer workaround. The log says:

Code: Select all

24.4.2011 [14:15]
WARNING: Unable to set to given video mode 1680x1050x32 (fullscreen), trying to set closest.

ERROR: Unable to set video mode 1680x1050x32 (fullscreen).

ERROR: Failed to initialize renderer
ERROR: Unable to set fullscreen mode


I'm running 64-bit Ubuntu 10.04.2 on a Thinkpad T500, which has both onboard Intel graphics and an ATI card.

Code: Select all

$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3650


I'm a little less certain about which driver info is needed, but here's some that seems relevant:

Code: Select all

$ lsmod | grep -E 'video|radeon|agp'
radeon                742816  0
ttm                    60847  1 radeon
drm_kms_helper         30742  2 i915,radeon
drm                   198916  5 i915,radeon,ttm,drm_kms_helper
i2c_algo_bit            6024  2 i915,radeon
intel_agp              29319  2 i915
video                  20623  1 i915
output                  2503  1 video


Let me know if you need more info.

capponz
Posts: 7
Joined: Sat Apr 23, 2011 3:10 am

Re: `GLIBCXX_3.4.14' not found

Postby capponz » Sun Apr 24, 2011 10:40 pm

thanks,
I tried all available video settings.

where can I find the log file?

Code: Select all

VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)


Code: Select all

video                  17375  1 i915
intel_agp              24375  2 i915
output                  1871  1 video
uvcvideo               57310  0
agpgart                31724  2 drm,intel_agp
videodev               34361  1 uvcvideo
v4l1_compat            13251  2 uvcvideo,videodev


cheers

blah
Posts: 2
Joined: Sun Apr 24, 2011 9:17 pm

Re: `GLIBCXX_3.4.14' not found

Postby blah » Sun Apr 24, 2011 11:35 pm

The log is in your home directory, here: ~/.frozenbyte/trine/logs/log.txt

User avatar
fb_joel
Site Admin
Posts: 2482
Joined: Fri Feb 18, 2005 2:14 pm
Location: Finland

Re: `GLIBCXX_3.4.14' not found

Postby fb_joel » Sun Apr 24, 2011 11:38 pm

Hi guys, just a quick post that I'm sorry it's taken a long time to get the new installer distributed - it's our/my fault and we hope to have the new installer on the download page on Tuesday the latest.
// Joel, Frozenbyte team

capponz
Posts: 7
Joined: Sat Apr 23, 2011 3:10 am

Re: `GLIBCXX_3.4.14' not found

Postby capponz » Mon Apr 25, 2011 2:14 am

I'm sad ... :-(

24.4.2011 [18:31]
ERROR: EXT_texture_compression_s3tc required
ERROR: Your graphics card cannot run this game. You can try updating your drivers.

dubigrasu
Posts: 8
Joined: Wed Apr 20, 2011 12:56 pm

Re: `GLIBCXX_3.4.14' not found

Postby dubigrasu » Mon Apr 25, 2011 7:24 am

capponz wrote:I'm sad ... :-(

24.4.2011 [18:31]
ERROR: EXT_texture_compression_s3tc required
ERROR: Your graphics card cannot run this game. You can try updating your drivers.


That's a pity indeed. :(
But you cannot blame the Humble guys, they said from the very beginning that the games won't run on Intel graphics:
http://frozenbyte.com/help_humble/

You can still get your money back though...
Last edited by dubigrasu on Mon Dec 02, 2013 10:36 am, edited 1 time in total.

capponz
Posts: 7
Joined: Sat Apr 23, 2011 3:10 am

Re: `GLIBCXX_3.4.14' not found

Postby capponz » Mon Apr 25, 2011 10:48 am

Money back? Oh no, that went to a good cause.
hopefully they do more Linux development.
cheers

capponz
Posts: 7
Joined: Sat Apr 23, 2011 3:10 am

Re: `GLIBCXX_3.4.14' not found

Postby capponz » Mon Apr 25, 2011 10:51 am

btw. I bought the first bundle as well and the games working well (without reading the fineprint)

nico
Posts: 1
Joined: Mon Apr 25, 2011 9:14 pm

Re: `GLIBCXX_3.4.14' not found

Postby nico » Mon Apr 25, 2011 9:18 pm

capponz wrote:I'm sad ... :-(

24.4.2011 [18:31]
ERROR: EXT_texture_compression_s3tc required
ERROR: Your graphics card cannot run this game. You can try updating your drivers.


Probably it will not work... but what happens if you install driconf and force s3tc compression from there?

capponz
Posts: 7
Joined: Sat Apr 23, 2011 3:10 am

Re: `GLIBCXX_3.4.14' not found

Postby capponz » Tue Apr 26, 2011 1:29 am

then:

Code: Select all

26.4.2011 [10:20]
INFO: Vertex profile: arbvp1
INFO: Vertex shader options:
INFO: NumTemps=32
INFO: MaxInstructions=4096
INFO: MaxAddressRegs=1
INFO: MaxLocalParams=1024
INFO: Vertex shader options end
INFO: Pixel profile: arbfp1
INFO: Pixel shader options:
INFO: ARB_draw_buffers
INFO: NumTemps=256
INFO: NumInstructionSlots=16384
INFO: NumTexInstructionSlots=16384
INFO: NumMathInstructionSlots=16384
INFO: MaxTexIndirections=16384
INFO: MaxLocalParams=1024
INFO: MaxDrawBuffers=4
INFO: Pixel shader options end
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program ssao_vertex entry point main
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program ssao_pixel entry point main
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program ssao_vertex entry point filter_horizontal
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program ssao_pixel entry point filter
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program ssao_vertex entry point filter_vertical
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program ssao_pixel entry point filter
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program deferred_light_vertex entry point pointLight
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point pointLight
INFO: shader warning log:
data/shader/cg/deferred_light_pixel.cg(418) : warning C7011: implicit cast from "float4" to "half3"
data/shader/cg/deferred_light_pixel.cg(606) : warning C7011: implicit cast from "float4" to "half3"

INFO: command line: 6
INFO: -DMORE_ACCURATE
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point pointLight
INFO: shader warning log:
data/shader/cg/deferred_light_pixel.cg(418) : warning C7011: implicit cast from "float4" to "half3"
data/shader/cg/deferred_light_pixel.cg(606) : warning C7011: implicit cast from "float4" to "half3"

INFO: command line: 6
INFO: -DUSE_3D
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program deferred_light_vertex entry point pointLight
INFO: command line: 6
INFO: -DUSE_3D
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point pointLight
INFO: command line: 7
INFO: -DUSE_3D
INFO: -DMORE_ACCURATE
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point pointLight
INFO: command line: 6
INFO: -DUSE_SPECULAR
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program deferred_light_vertex entry point pointLight
INFO: command line: 6
INFO: -DUSE_SPECULAR
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point pointLight
INFO: shader warning log:
data/shader/cg/deferred_light_pixel.cg(418) : warning C7011: implicit cast from "float4" to "half3"
data/shader/cg/deferred_light_pixel.cg(606) : warning C7011: implicit cast from "float4" to "half3"

INFO: command line: 7
INFO: -DUSE_SPECULAR
INFO: -DMORE_ACCURATE
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point pointLight
INFO: shader warning log:
data/shader/cg/deferred_light_pixel.cg(418) : warning C7011: implicit cast from "float4" to "half3"
data/shader/cg/deferred_light_pixel.cg(606) : warning C7011: implicit cast from "float4" to "half3"

INFO: command line: 7
INFO: -DUSE_SPECULAR
INFO: -DUSE_3D
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program deferred_light_vertex entry point pointLight
INFO: command line: 7
INFO: -DUSE_SPECULAR
INFO: -DUSE_3D
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point pointLight
INFO: command line: 8
INFO: -DUSE_SPECULAR
INFO: -DUSE_3D
INFO: -DMORE_ACCURATE
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point pointLight
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program deferred_light_vertex entry point spotLight
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point spotLight
INFO: shader warning log:
data/shader/cg/deferred_light_pixel.cg(418) : warning C7011: implicit cast from "float4" to "half3"
data/shader/cg/deferred_light_pixel.cg(606) : warning C7011: implicit cast from "float4" to "half3"

INFO: command line: 6
INFO: -DMORE_ACCURATE
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point spotLight
INFO: shader warning log:
data/shader/cg/deferred_light_pixel.cg(418) : warning C7011: implicit cast from "float4" to "half3"
data/shader/cg/deferred_light_pixel.cg(606) : warning C7011: implicit cast from "float4" to "half3"

INFO: command line: 6
INFO: -DUSE_3D
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program deferred_light_vertex entry point spotLight
INFO: command line: 6
INFO: -DUSE_3D
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point spotLight
INFO: command line: 7
INFO: -DUSE_3D
INFO: -DMORE_ACCURATE
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point spotLight
INFO: command line: 6
INFO: -DUSE_SPECULAR
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program deferred_light_vertex entry point spotLight
INFO: command line: 6
INFO: -DUSE_SPECULAR
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point spotLight
INFO: shader warning log:
data/shader/cg/deferred_light_pixel.cg(418) : warning C7011: implicit cast from "float4" to "half3"
data/shader/cg/deferred_light_pixel.cg(606) : warning C7011: implicit cast from "float4" to "half3"

INFO: command line: 7
INFO: -DUSE_SPECULAR
INFO: -DMORE_ACCURATE
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point spotLight
INFO: shader warning log:
data/shader/cg/deferred_light_pixel.cg(418) : warning C7011: implicit cast from "float4" to "half3"
data/shader/cg/deferred_light_pixel.cg(606) : warning C7011: implicit cast from "float4" to "half3"

INFO: command line: 7
INFO: -DUSE_SPECULAR
INFO: -DUSE_3D
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program deferred_light_vertex entry point spotLight
INFO: command line: 7
INFO: -DUSE_SPECULAR
INFO: -DUSE_3D
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point spotLight
INFO: command line: 8
INFO: -DUSE_SPECULAR
INFO: -DUSE_3D
INFO: -DMORE_ACCURATE
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point spotLight
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program deferred_light_vertex entry point ambient
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point ambient
INFO: shader warning log:
data/shader/cg/deferred_light_pixel.cg(418) : warning C7011: implicit cast from "float4" to "half3"
data/shader/cg/deferred_light_pixel.cg(606) : warning C7011: implicit cast from "float4" to "half3"

INFO: command line: 6
INFO: -DMORE_ACCURATE
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point ambient
INFO: shader warning log:
data/shader/cg/deferred_light_pixel.cg(418) : warning C7011: implicit cast from "float4" to "half3"
data/shader/cg/deferred_light_pixel.cg(606) : warning C7011: implicit cast from "float4" to "half3"

INFO: command line: 6
INFO: -DUSE_3D
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program deferred_light_vertex entry point ambient
INFO: command line: 6
INFO: -DUSE_3D
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point ambient
INFO: command line: 7
INFO: -DUSE_3D
INFO: -DMORE_ACCURATE
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point ambient
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program deferred_blur_vertex entry point main
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_blur_pixel entry point main
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program deferred_light_vertex entry point ao
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point ao
INFO: shader warning log:
data/shader/cg/deferred_light_pixel.cg(418) : warning C7011: implicit cast from "float4" to "half3"
data/shader/cg/deferred_light_pixel.cg(606) : warning C7011: implicit cast from "float4" to "half3"

INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program deferred_light_vertex entry point negative
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point negative
INFO: shader warning log:
data/shader/cg/deferred_light_pixel.cg(418) : warning C7011: implicit cast from "float4" to "half3"
data/shader/cg/deferred_light_pixel.cg(606) : warning C7011: implicit cast from "float4" to "half3"

INFO: command line: 6
INFO: -DMORE_ACCURATE
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point negative
INFO: shader warning log:
data/shader/cg/deferred_light_pixel.cg(418) : warning C7011: implicit cast from "float4" to "half3"
data/shader/cg/deferred_light_pixel.cg(606) : warning C7011: implicit cast from "float4" to "half3"

INFO: command line: 6
INFO: -DUSE_3D
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program deferred_light_vertex entry point negative
INFO: command line: 6
INFO: -DUSE_3D
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point negative
INFO: command line: 7
INFO: -DUSE_3D
INFO: -DMORE_ACCURATE
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program deferred_light_pixel entry point negative
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program ui_vertex entry point diffuse_texture_2d
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program ui_pixel entry point diffuse_texture
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program ui_vertex entry point diffuse_3d
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program ui_pixel entry point diffuse_notexture
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program particle_vertex entry point main
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program particle_pixel entry point main
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program particle_vertex entry point distortion
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program particle_pixel entry point distortion
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program distortion_target_vertex entry point main
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program distortion_target_pixel entry point main
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program distortion_target_vertex entry point main
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program distortion_target_pixel entry point offset
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program rendertarget_vertex entry point main
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program rendertarget_pixel entry point main
INFO: command line: 6
INFO: -DUSE_DISTORTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program rendertarget_vertex entry point main
INFO: command line: 6
INFO: -DUSE_DISTORTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program rendertarget_pixel entry point main
INFO: command line: 6
INFO: -DUSE_GLOW=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program rendertarget_vertex entry point main
INFO: command line: 6
INFO: -DUSE_GLOW=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program rendertarget_pixel entry point main
INFO: command line: 7
INFO: -DUSE_GLOW=1
INFO: -DUSE_DISTORTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program rendertarget_vertex entry point main
INFO: command line: 7
INFO: -DUSE_GLOW=1
INFO: -DUSE_DISTORTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program rendertarget_pixel entry point main
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program glow_vertex entry point filter_horizontal
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program glow_pixel entry point filter
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program glow_vertex entry point filter_vertical
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program glow_pixel entry point filter
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program glow_vertex entry point filter_hdr
INFO: command line: 5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program glow_pixel entry point filter_hdr
INFO: command line: 6
INFO: -DLIGHT_AMOUNT=0
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 6
INFO: -DLIGHT_AMOUNT=0
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=0
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=0
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 6
INFO: -DLIGHT_AMOUNT=0
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 6
INFO: -DLIGHT_AMOUNT=0
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=0
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=0
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=0
INFO: -DNORMALIZE_VECTORS=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=0
INFO: -DNORMALIZE_VECTORS=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=0
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=0
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=0
INFO: -DNORMALIZE_VECTORS=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=0
INFO: -DNORMALIZE_VECTORS=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=0
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=0
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 6
INFO: -DLIGHT_AMOUNT=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 6
INFO: -DLIGHT_AMOUNT=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=1
INFO: -DUSE_SPECULAR=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=1
INFO: -DUSE_SPECULAR=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=1
INFO: -DUSE_SPECULAR=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=1
INFO: -DUSE_SPECULAR=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=1
INFO: -DNORMALIZE_VECTORS=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=1
INFO: -DNORMALIZE_VECTORS=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=1
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=1
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=1
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_SPECULAR=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=1
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_SPECULAR=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 9
INFO: -DLIGHT_AMOUNT=1
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_SPECULAR=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 9
INFO: -DLIGHT_AMOUNT=1
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_SPECULAR=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 6
INFO: -DLIGHT_AMOUNT=2
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 6
INFO: -DLIGHT_AMOUNT=2
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=2
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=2
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=2
INFO: -DUSE_SPECULAR=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=2
INFO: -DUSE_SPECULAR=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=2
INFO: -DUSE_SPECULAR=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=2
INFO: -DUSE_SPECULAR=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=2
INFO: -DNORMALIZE_VECTORS=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=2
INFO: -DNORMALIZE_VECTORS=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=2
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=2
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=2
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_SPECULAR=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=2
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_SPECULAR=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 9
INFO: -DLIGHT_AMOUNT=2
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_SPECULAR=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 9
INFO: -DLIGHT_AMOUNT=2
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_SPECULAR=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 6
INFO: -DLIGHT_AMOUNT=3
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 6
INFO: -DLIGHT_AMOUNT=3
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=3
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=3
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=3
INFO: -DUSE_SPECULAR=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=3
INFO: -DUSE_SPECULAR=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=3
INFO: -DUSE_SPECULAR=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=3
INFO: -DUSE_SPECULAR=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=3
INFO: -DNORMALIZE_VECTORS=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=3
INFO: -DNORMALIZE_VECTORS=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=3
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=3
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=3
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_SPECULAR=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=3
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_SPECULAR=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 9
INFO: -DLIGHT_AMOUNT=3
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_SPECULAR=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 9
INFO: -DLIGHT_AMOUNT=3
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_SPECULAR=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 6
INFO: -DLIGHT_AMOUNT=4
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 6
INFO: -DLIGHT_AMOUNT=4
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=4
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=4
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=4
INFO: -DUSE_SPECULAR=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=4
INFO: -DUSE_SPECULAR=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=4
INFO: -DUSE_SPECULAR=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=4
INFO: -DUSE_SPECULAR=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=4
INFO: -DNORMALIZE_VECTORS=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 7
INFO: -DLIGHT_AMOUNT=4
INFO: -DNORMALIZE_VECTORS=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=4
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=4
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=4
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_SPECULAR=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 8
INFO: -DLIGHT_AMOUNT=4
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_SPECULAR=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 9
INFO: -DLIGHT_AMOUNT=4
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_SPECULAR=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 9
INFO: -DLIGHT_AMOUNT=4
INFO: -DNORMALIZE_VECTORS=1
INFO: -DUSE_SPECULAR=1
INFO: -DUSE_LOCAL_REFLECTION=1
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: ARB_draw_buffers,NumTemps=256,NumInstructionSlots=16384,NumTexInstructionSlots=16384,NumMathInstructionSlots=16384,MaxTexIndirections=16384,MaxLocalParams=1024,MaxDrawBuffers=4,ARB_draw_buffers
INFO: [end]
INFO: Compiling program lighting_pixel entry point mesh
INFO: command line: 6
INFO: -DLIGHT_AMOUNT=5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO: NumTemps=32,MaxInstructions=4096,MaxAddressRegs=1,MaxLocalParams=1024
INFO: [end]
INFO: Compiling program lighting_vertex entry point mesh
INFO: command line: 6
INFO: -DLIGHT_AMOUNT=5
INFO: -O3
INFO: -bestprecision
INFO: -po
INFO:   :lol:  and so on

i reduced the log info.
Your message contains 86038 characters. The maximum number of allowed characters is 60000.

CyDharttha
Posts: 2
Joined: Thu Apr 21, 2011 6:13 am

Re: `GLIBCXX_3.4.14' not found

Postby CyDharttha » Tue Apr 26, 2011 5:02 am

fb_joel wrote:Hi guys, just a quick post that I'm sorry it's taken a long time to get the new installer distributed - it's our/my fault and we hope to have the new installer on the download page on Tuesday the latest.


Thank you much!

yyeshua
Posts: 1
Joined: Tue Apr 26, 2011 3:39 pm

Re: `GLIBCXX_3.4.14' not found

Postby yyeshua » Tue Apr 26, 2011 3:53 pm

Hey, hi guys.

I read all the posts and the cpnsole solution for debian XD But I'm not debian user,

I have Mandriva 2010.2, and in the install process i have the same error:

Code: Select all

./Trine-1.32.run: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.14' not found (required by ./Trine-1.32.run)


Well, I hope get a solution without install Debian testing on my PC, i love my Mandriva and is the las stable ¬¬

Its so hard recompile the game with some previus realese of the libreries?? I think a simple recompilation can do a game more compatibl between the linux distros.

Any way, my post itś more for add another voice in the linux gamers list.

See ya.

crade
Posts: 6
Joined: Tue Apr 26, 2011 8:35 am

Re: `GLIBCXX_3.4.14' not found

Postby crade » Tue Apr 26, 2011 5:25 pm

It's been mentioned, but this worked for me too
You should still be able to run the game if you get this error just use your unzip program to
unzip Trine-1.32.run

into the directory of your choice
then run the game directly or using the launcher for your arch.

deaddrop
Posts: 4
Joined: Wed Apr 20, 2011 1:46 pm

Re: `GLIBCXX_3.4.14' not found

Postby deaddrop » Wed Apr 27, 2011 2:08 pm

Just downloaded TrineUpdate2.64.run and working perfectly,
Ubuntu10.04 64bit
Thanks guys.

spencer
Posts: 13
Joined: Wed Apr 20, 2011 7:24 pm

Re: `GLIBCXX_3.4.14' not found

Postby spencer » Wed Apr 27, 2011 11:29 pm

yyeshua wrote:Hey, hi guys.

I read all the posts and the cpnsole solution for debian XD But I'm not debian user,

I have Mandriva 2010.2, and in the install process i have the same error:

Code: Select all

./Trine-1.32.run: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.14' not found (required by ./Trine-1.32.run)


Well, I hope get a solution without install Debian testing on my PC, i love my Mandriva and is the las stable ¬¬

Its so hard recompile the game with some previus realese of the libreries?? I think a simple recompilation can do a game more compatibl between the linux distros.

Any way, my post itś more for add another voice in the linux gamers list.

See ya.

The issue is not distro-specific, it's just a matter of one specific library that the installer apparently needs in a newer version. You can adapt Terseus's workaround for your distro by downloading the appropriate package from Mandriva's newer/testing release (I think it's called Cooker?) and then following the instructions from there.

The new Trine should have fixed the issue, though. Downloading now to find out.

EDIT: Yep, it works. Running Debian 6.01 AMD64 with the fglrx ATI driver. Thanks very much to alt_turo, Joel, and the rest of the Frozenyte guys/gals for their hard work on the Linux version.

whizse
Posts: 17
Joined: Fri Apr 29, 2011 4:03 pm

Re: `GLIBCXX_3.4.14' not found

Postby whizse » Tue May 03, 2011 9:38 pm

capponz wrote:I'm sad ... :-(

24.4.2011 [18:31]
ERROR: EXT_texture_compression_s3tc required
ERROR: Your graphics card cannot run this game. You can try updating your drivers.

You need libtxc_dxtn, either see if there are any packages for your distro, or grab it from http://cgit.freedesktop.org/~mareko/libtxc_dxtn/


Return to “Trine Technical Support for Linux & Mac”

Who is online

Users browsing this forum: No registered users and 1 guest